EASYJoint PRO Jointing Compound 17Kg - Stone Grey

The two-part epoxy compound formula is rated up to seven tonnes per square metre - ideal for driveways and commercial or heavy footfall areas.

EASYJoint PRO is a coated sand to which you carefully mix with the activator using a mechanical whisk or whisk attachment on a drill. This creates a pourable slurry which is swept in to the joints.

EASYJoint PRO is available in three different colours; Mushroom, Stone Grey and Basalt - allowing you to point your paving to suit your style.

Unlike original EASYJoint one-part solutions, EASYJoint PRO has a different composition, allowing it to cure in both dry and damp conditions. It is worth noting however, that EASYJoint PRO should not be installed when it is due to rain as this can dilute the epoxy resin, weakening the solution.

EASYJoint PRO can be used on joints 5mm or wider, with a minimum depth of 20mm. A 20mm or deeper depth provides more strength to the jointing compound for greater longevity.

You should seal your paving with a sealer, prior to using EASYJoint PRO. As EASYJoint PRO is not installed using copious amounts of water like one-part compounds, sealing the paving prior to jointing with EASYJoint PRO helps to protect the paving from being stained by the epoxy. If the paving is not pre-sealed and EASYJoint PRO leaved a shiny residue, it is possible to remove using EASYCare Sealer Remover.

It is best to avoid using EASYJoint PRO if rain is forecast, as heavy rain can dilute the epoxy - weakening the mix and reducing the strength of the compound. Light rain is usually not a problem, but prolonged rain may lead to the same aforementioned issues - so err on the side of caution. Similarly, unlike EASYJoint Original and EASYJoint Select where 'the wetter the better' aids installation, you do not install EASYJoint PRO in the same way as the compound once mixed has the correct workability, only a light misting over the paving prior to sweeping in is required.

Unlike EASYJoint original one-part compound, EASYJoint PRO cannot be stored for future use once mixed. Once the activator is mixed with the sand, the chemical reaction cannot be undone, meaning that any leftover product will need to be discarded.